Slope of a line
slope = rise ÷ run = ΔY ÷ ΔX
How much the vertical variable changes for each one-unit change in the horizontal one. A straight line is Y = intercept + slope × X.
Example A line rising 3 for every 4 across has slope 3 ÷ 4 = 0.75.
Home › Topics › Formula cheat sheet
MICROECONOMICSEvery formula you need for introductory microeconomics, on one page: 38 formulas, each with what it means and a worked example. It pairs with the graph cheat sheet, which covers the diagrams.
Slopes, percentages, opportunity cost and trade. Explainer: Scarcity & trade-offs
slope = rise ÷ run = ΔY ÷ ΔX
How much the vertical variable changes for each one-unit change in the horizontal one. A straight line is Y = intercept + slope × X.
Example A line rising 3 for every 4 across has slope 3 ÷ 4 = 0.75.
%Δ = (new − old) ÷ old × 100
The building block of every elasticity.
Example Price rises from $4 to $5: (5 − 4) ÷ 4 = 25%.
%Δ = (new − old) ÷ [(new + old) ÷ 2] × 100
Divides by the average of the two values, so you get the same answer going up or down. Use it when a question says “midpoint”.
Example $4 to $5: 1 ÷ 4.5 = 22.2%, and the same from $5 to $4.
cost of 1 X = what you give up ÷ what you gain
The next-best alternative given up, measured in the other good. On a straight PPF it equals the slope (ignoring the sign).
Example You can make 10 pizzas or 5 playlists: 1 pizza costs 5 ÷ 10 = 0.5 playlists.
specialise where your opportunity cost is lower
Trade helps both sides when the price lies between the two producers' opportunity costs.
Example Your playlist costs 2 pizzas; your roommate's costs 1. Any price between 1 and 2 pizzas per playlist works for both.
Equilibrium, shortages and surpluses. Explainer: Supply & demand
set Qd = Qs, solve for P, then plug back in for Q
With straight lines Qd = a − bP and Qs = c + dP, equilibrium P* = (a − c) ÷ (b + d).
Example Qd = 140 − 20P and Qs = −50 + 20P give 190 = 40P, so P* = $4.75 and Q* = 140 − 95 = 45.
shortage = Qd − Qs at the capped price
A ceiling only binds below equilibrium. The quantity actually traded is the smaller side: Qs.
Example Cap at $4 in the market above: Qd = 60, Qs = 30, so a shortage of 30 and only 30 traded.
surplus = Qs − Qd at the floor price
A floor only binds above equilibrium. The quantity traded is Qd.
Example Floor at $5.50: Qs = 60, Qd = 30, so a surplus of 30.
How strongly quantity responds. Explainer: Elasticity
Ed = %ΔQd ÷ %ΔP
Usually reported as an absolute value. |Ed| > 1 elastic, < 1 inelastic, = 1 unit elastic.
Example Price +10%, quantity −20%: |Ed| = 2, so demand is elastic.
Ed = [ΔQ ÷ avg Q] ÷ [ΔP ÷ avg P]
Use with two points on a demand curve. Same answer in both directions.
Example P from $4 to $6, Q from 120 to 80: (−40 ÷ 100) ÷ (2 ÷ 5) = −1, unit elastic.
TR = P × Q
If price and total revenue move in the same direction, demand is inelastic; in opposite directions, elastic.
Example Coffee $2.40 → $2.75, cups 1,400 → 1,310: TR $3,360 → $3,602.50. Both rose, so inelastic.
Es = %ΔQs ÷ %ΔP
Larger in the long run, when firms can add capacity.
Example Price +10%, quantity supplied +5%: Es = 0.5, inelastic.
Ei = %ΔQd ÷ %ΔIncome
Positive: normal good (above 1: luxury). Negative: inferior good.
Example Income +10%, quantity +15%: Ei = 1.5, a normal good and a luxury.
Exy = %ΔQx ÷ %ΔPy
The sign is the answer. Positive: substitutes. Negative: complements. Near zero: unrelated.
Example Bus fares +15%, ride-share trips +6%: +0.4, so substitutes.
%ΔQ = E × %Δ(driver)
Rearrange any elasticity to forecast the quantity change.
Example With Exy = 0.4, a 25% fare rise means 0.4 × 25 = +10% ride-share trips.
Surplus, deadweight loss and who pays. Explainer: Price controls & shifts
CS = ½ × Q × (top of demand − P)
The triangle under demand and above the price, for straight-line demand.
Example Demand starts at $10, price $4, 30 sold: CS = ½ × 30 × 6 = $90.
PS = ½ × Q × (P − bottom of supply)
The triangle above supply and below the price.
Example Supply starts at $1, price $4, 30 sold: PS = ½ × 30 × 3 = $45.
TS = CS + PS
Largest at the competitive equilibrium; any control or tax that cuts trade lowers it.
Example $90 + $45 = $135.
DWL = ½ × (lost quantity) × (wedge)
The triangle of trades that no longer happen. The wedge is the gap between what buyers pay and sellers receive.
Example A $2 tax cuts sales from 30 to 24: DWL = ½ × 6 × 2 = $6.
revenue = tax per unit × quantity after the tax
A rectangle between the buyer price and the seller price.
Example $2 × 24 = $48.
buyers' share = Es ÷ (Es + |Ed|)
The more inelastic side pays more, whoever legally writes the cheque. Sellers' share is |Ed| ÷ (Es + |Ed|).
Example |Ed| = 0.5, Es = 1.5: buyers pay 1.5 ÷ 2 = 75% of the tax.
Products, cost curves and profit. Explainer: Costs & firms
MPL = ΔQ ÷ ΔL · APL = Q ÷ L
Diminishing marginal returns: MPL eventually falls as workers share fixed equipment.
Example A 3rd baker lifts output from 45 to 75 loaves: MPL = 30.
TC = FC + VC
Fixed costs don't change with output; variable costs do.
Example $40 rent + $150 of labour = $190.
ATC = TC ÷ Q · AVC = VC ÷ Q · AFC = FC ÷ Q
ATC = AVC + AFC, so the gap between ATC and AVC is average fixed cost.
Example 20 loaves at TC $190: ATC = $9.50, AVC = $150 ÷ 20 = $7.50, AFC = $2.
MC = ΔTC ÷ ΔQ = W ÷ MPL
The cost of one more unit. Because MC = W ÷ MPL, falling MPL means rising MC.
Example The 3rd baker costs $150 and adds 30 loaves: MC = $5.
TR = P × Q · MR = ΔTR ÷ ΔQ
For a price taker, MR = P. For a firm with downward-sloping demand, MR < P.
Example At $7 a loaf, each extra loaf adds $7.
profit = TR − TC = (P − ATC) × Q
The rectangle between price and ATC, at the chosen quantity.
Example ($24 − $17.45) × 11 ≈ $72.
economic profit = TR − explicit − implicit costs
Implicit costs are what the owner gives up, such as a forgone salary. Accounting profit counts explicit costs only.
Example Revenue $300, variable $150, rent $60, forgone wage $40: accounting $90, economic $50.
hire while VMPL = P × MPL ≥ W
The labour-market version of MR = MC. Generally, hire while MRP = MR × MPL ≥ W.
Example 3rd baker: $7 × 30 = $210 ≥ $150, hire. 4th: $7 × 20 = $140 < $150, don't.
Output, shutdown and pricing rules. Explainer: Market structures
produce where MR = MC
For every firm. Then read the price from the demand curve (or the price line, for a price taker).
Example Ramen shop: MR = 40 − 2Q meets MC = 10 + Q at Q = 10.
P = MR, so produce where P = MC
Long run: entry and exit push price to the minimum of ATC and economic profit to zero.
Example At $24 the stand sells 11 flats; in the long run price falls to min ATC, $16.
shut down only if P < min AVC
If P ≥ ATC: profit. If AVC ≤ P < ATC: a loss, but keep producing. Below AVC, closing loses less.
Example At $10 with AVC $6, operating loses $33; closing would lose all $49 of fixed cost.
demand P = a − bQ → MR = a − 2bQ
With straight-line demand, MR starts at the same point and falls twice as steeply.
Example P = 40 − Q gives MR = 40 − 2Q. Q = 10 sells at P = 40 − 10 = $30.
efficient: P = MC · fair return: P = ATC
P = MC gives the efficient output but a loss, needing a subsidy. P = ATC breaks even.
Example Ferry: P = MC gives 80 tickets at $10 (loss $800 a day); P = ATC gives about 68 at about $21.70.
DWL = ½ × (Q efficient − Q monopoly) × (P monopoly − MC)
With constant MC, the triangle between demand and MC from the monopoly output to the efficient one.
Example Ferry: ½ × (80 − 40) × ($50 − $10) = $800 a day.
Budget lines and the best bundle. Explainer: From bread ovens to budget lines
Px × X + Py × Y = Income
Intercepts: income ÷ each good's price. A change in income shifts it in parallel; a price change pivots it.
Example $160 budget, dinners $40, climbing $8: at most 4 dinners or 20 visits.
slope = −Px ÷ Py
The opportunity cost of one more X, in units of Y.
Example −8 ÷ 40 = −1/5: each climbing visit costs a fifth of a dinner.
MUx ÷ Px = MUy ÷ Py
Spend each dollar where it buys the most extra satisfaction. On a graph: MRS = Px ÷ Py, where the indifference curve touches the budget line.
Example Last pizza: 30 units of utility for $10 (3 per $). Last coffee: 12 for $3 (4 per $). Buy more coffee.
Formulas stick better once you've watched them work. Drag the curves in the supply and demand simulator, or run a bakery in Sourdough Stall and watch MC climb as MPL falls.
Supply and demand simulator →playecon.com · CC BY-NC-SA 4.0